1/3 www.rohm.com c 2010 rohm co., ltd. all rights reserved. 2010.09 - rev.c ultra-low ohmic resistors for current detection(wide terminal type) pml100 ? features 1) ultra-low resistance range (0.5m ? -) 2) wide terminal configuration for high joint reliability. 3) unique trimless structure utilized for improved current detection accuracy. 4) iso9001- / iso/ts 16949- approved ? rating (0.5m ) ? 55 c to + 155 c 2w (1.0 to 2.2m ) 3w at 25 c 2w at 70 c the load shall be derated in accordance with fig.1 item conditions specifications rated power rated voltage and current are determined from the following. e = p r i = p / r rated voltage rated current temperature resistance see table 1. e: rated voltage (v) i : rated current (a) p: rated power (w) r: resistance ( ) 0 20 40 60 80 100 ? 55 0 70 100 125 155 ambient temperature ( c) power load (%) 0 20 40 60 80 100 ? 55 0 70 25 100 125 155 ambient temperature ( c) power load (%) fig.1 (0.5m ) (1.0 ? ? m ) 1.0,1.5,2.0,2.2 0.5 v j ( 5%) 150 100 r esistance (m ) tolerance special code temperature coefficient (ppm / ?c) table.1
2/3 www.rohm.com c 2010 rohm co., ltd. all rights reserved. 2010.09 - rev.c data sheet pml100 ? characteristics ??? item test conditions (jis c 5201-1) resistor type guaranteed value resistance variation of resistance with temperature solderability damp heat, steady state endurance at 70 c endurance rapid change of temperature bend strength of the end face plating component solvent resistance resistance to soldering heat overload ( 2.0%+0.0001 ) j : 5% no remarkable abnormality on the appearance. a new uniform coating of minimum of 95% of the surface being immersed and no soldering damage. without open jis c 5201-1 4.5 jis c 5201-1 4.8 measurement : 25 / ? 55 / +25 / + 125 c jis c 5201-1 4.18 soldering condition : 260 5 c duration of immersion : 10 1s. jis c 5201-1 4.24 40 c, 93%rh test time : 56days ( 1.0%+0.0001 ) ( 1.0%+0.0001 ) ( 3.0%+0.0001 ) ( 3.0%+0.0001 ) ( 3.0%+0.0001 ) ( 0.5%+0.0001 ) jis c 5201-1 4.25.1 70 c,rated power 1.5h : on ? 0.5h : off test time : 1,000h to 1,048h jis c 5201-1 4.25.3 155 c test time : 1,000h to 1,048h jis c 5201-1 4.29 23 5 c solvent : 2-propanol jis c 5201-1 4.19 test temp. : ? 55 c to + 125 c 5cyc jis c 5201-1 4.33 jis c 5201-1 4.17 rosin?thanol (25%wt) soldering condition : 235 5 c duration of immersion : 2.0 0.5s. jis c 5201-1 4.13 rated power 2.5, 2s. see table.1 ? ? ?
3/3 www.rohm.com c 2010 rohm co., ltd. all rights reserved. 2010.09 - rev.c data sheet pml100 ? dimensions&construction ? 0.50 0.45 0.90 0.70 0.40 0.36 3.20 6.40 ? ? ? ? ? no. material resistive metal element(ni-cu/ni-cr alloy) inner electrode(cu) external electrode(sn) over coat(resin : black) marking(resin : yellow) l w t a ? ? ? ? ? ? the surface the back the cross section resistance measure l 0.25 w 0.25 t 0.15 a 0.25 b 0.25 0.5m 1.0m 1.5m 2.0m 2.2m 1l00 a b b ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? part no. explanation ?? ? pm 1 l 0 h z p j v 0 special part number p ackaging specifications code part no. hzp part no. resistance tolerance j( 5%) code embossed tape (4mm pitch) 180mm (7inch ) packaging specifications reel 2 , 000 basic ordering unit (pcs) reel ( 180mm) : compatible with jeita standard "eiaj et-7200b" : standard product resistance tolerance 5% j pml100 nominal resistance resistance code, 3 digits. resistance value 3 digits (j) 1m 2m 1.5m 2l0 2.2m 2l2 1l5 1l0 0.5m 0l5 ? ? ? ? packaging ?? abcd 12.0 0.3 5.5 0.05 1.75 0.1 3.5 0.2 6.7 0.2 4.0 0.1 4.0 0.1 2.0 0.05 max. 1.1 180 0 ? 1.5 60 +1 13 0.2 13 1.5 +0.1 0 0 2 0 4 0 6 0 8 0 2 0 4 0 6 0 8 c abd label reel taping a 0 p 1 p 0 p 2 b 0 f w k e d 0 eiaj et-7200b compliant (unit : mm) (unit : mm) wf ea 0 b 0 d 0 p 0 p 1 p 2 k +1.0 0 0
r1010 a www.rohm.com ? 2010 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specied herein is subject to change for improvement without notice. the content specied herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. great care was taken in ensuring the accuracy of the information specied in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specied herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specied in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, ofce-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specied in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, re or any other damage caused in the event of the failure of any product, such as derating, redunda ncy, re control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospac e machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specied herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law.
|
